Ground-Mounted Solar

Ground-mounted solar for farms, estates, businesses and homes with land.

When the roof is shaded, too small, listed, or simply not where you want panels, we put the array on the ground instead: frames in a field, paddock or garden, cabled back to the building. We design the array, deal with the network operator and install it with our own engineers.

MCS certified (25481) · RECC · TrustMark · NAPIT · 1,500+ installations since 2010

Call 01592 596 789, Monday to Friday, 9 to 5.

Farms and estates

Steadings, sheds and estate buildings often have the land but not the right roof. A ground array can face due south at the best angle and sit close to where the power is used.

Businesses and public bodies

Ground arrays beside offices and depots, sized from your load data, with battery storage where it helps more of the generation get used on site.

Homes with land

If you have a paddock or a large garden, a small ground array can do the job of a roof system without touching the house.

Sigenergy EV DC bidirectional charger

75 kW and 54 kWh of storage for a public body, Golspie

A ground-mounted array beside NatureScot’s office in Sutherland, commissioned in 2022 and paired with 54 kWh of battery storage, so more of the site’s own generation is used in the building.

Sigenergy EV DC bidirectional charger

48 kW at a hydro scheme, Stormontfield

A ground-mounted array running alongside the lade at a hydro scheme in Perthshire, completed in 2025.

Sigenergy EV DC bidirectional charger

50 kW for Kingdom Farming, Kilrie Granary

A 50 kW ground-mounted array at Kilrie Granary, a working farm in Fife, completed in 2024.

Sigenergy EV DC bidirectional charger

3.6 kW in a walled garden, Kirkcaldy

Ground mounts do not have to be big. This small array sits beside a restored glasshouse in a walled garden, where panels on the building itself were not an option.

More of our ground-mount work

  • 50 kW ground mount for Tayport Community Hub
  • 15 kW for a family home near Ladybank
  • Repairs on a 12 MW solar farm, where we carry out repair work

How a ground-mount project runs

  1. Send us the site and your bills. The address, roughly where you would like the array, and a year of electricity use.
  2. Desk study. We check the land, shading and yield from satellite and survey data, and what the local network can accept.
  3. Site visit. We look at the ground, the cable route back to the building and the incoming supply.
  4. Design, planning and grid connection. We tell you what permissions apply to your site and submit the network operator application for you.
  5. Installation. Frames, panels, trenching and cabling by our own engineers, then inverters and any battery storage.
  6. Commissioning and aftercare. Certified, monitored remotely, and maintained through Alba Solar Care.

Ground-mount questions

It depends on the size of the array and where it sits. Some small arrays in the grounds of a house can go ahead without an application, and larger ones usually need planning permission. We tell you what applies to your site before you commit to anything.

It depends on the size of the system and the cable route. Longer runs need heavier cable and more trenching, so we look for the closest position that still gets good sun, and price the cable run into the quote.

That depends on the ground. We decide on the foundation after we have seen the site, and design the frame for the exposure and wind loading there.

Yes. A ground array connects to the same Sigenergy inverters and SigenStor batteries as a roof system, and storage can be added at the start or later.

There is no fixed limit on our side. The size is set by your land, what you use and what the local network will accept.

Yes. Alba Solar Care is open to systems fitted by other firms, and we carry out repairs on larger arrays too.

Tell us about your land.

Send us the address, a year of electricity use and roughly where the array could go. Your domestic quote typically comes back within one working day; commercial designs take longer and we will agree the timescale with you.

All-black solar panels installed by Alba Heat and Power on a new-build home

Solar PV

We carry out solar panel installations on residential and commercial properties. We also provide ongoing maintenance and repair services to ensure your solar power system is operating at its highest efficiency.

Sigenergy SigenStor home battery storage range

Battery Storage

With battery storage integration, you can use solar even at night! Battery Storage converts any power generated by solar panels during the day and stores it for later use. At times, this technology enables households to become completely energy independent.

Sigenergy EV AC charger charging an electric car at home

EV Charge Points

Alba Heat and Power ensures that both residential and commercial customers can efficiently power their electric vehicles. Alba Heat and Power’s charge points are designed to be energy-efficient, contributing to a reduction in carbon footprints.